High Grip Extended Safety, Tactical

Tactical extended high grip safety for those who only need a right hand safety.

High Grip Extended Safety, Wide

Wide extended high grip safety for those who only need a right hand safety.

High Grip

Cylinder & Slides High Grip Ambi Safety has been designed to be compatible with High Grip Beavertail Grip safeties. Relieved and contoured to fit frame profile after installation of High Grip Beavertail. Rear levers have been contoured downward for more comfortable thumb rest.

High Grip

Cylinder & Slides High Grip Ambi Safety has been designed to be compatible with High Grip Beavertail Grip safeties. Relieved and contoured to fit frame profile after installation of High Grip Beavertail. Rear levers have been contoured downward for more comfortable thumb rest.

Stainless Steel Fully Supported Round Top Follower

This replacement Follower for Colt style .45 magazines will make them feel more smoothly and reliably because it eliminates the tipping and binding possible with the original style follower. This follower does not increase magazine capacity.

Extreme Duty 1911 Single Stack 7 Round 45 Magazine

Designed for extremely reliability for tactical carry weapons. Contains extra power spring. Price is each.

1911 Single Stack 45 - 7 Round Magazine,  2 Pack

1911 Single Stack 45 - 7 Round Magazine 2 magazines per package.

Tactical 6 Round 1911 Single Stack Officers Model 45 Magazine

Tactical 6 Round 1911 Single Stack Officers Model 45 Magazine. Price is each.

9mm 1911 Single Stack 9 Round Magazine

9mm 1911 Single Stack 9 Round Magazine. Price is for each.

Extreme Duty 1911 Single Stack Officers Model 6 Round Magazine

Designed for extreme reliability for tactical carry weapons. Contains extra power spring. Price is for each.

MecGar 1911 magazine

MecGar 1911 Goverment-Commander 7 round magazine.

MecGar 1911 Officers Model 6 round magazine

MecGar 1911 Officers Model 6 round magazine - Blue

MecGar 1911 Government - Commander 7 Round Magazine

MecGar 1911 Officers Model 6 Round Magazine - Nickel

SFS Flashlight Mount

The SFS Flashlight Mount consists of an injection molded polymer mount that holds the flashlight. The ring that clamps the flashlight will hold a light that is .009" to 1.062" in diameter. This allows you to clamp any of the popular personal protection lights manufactured by Sure Fire, Sream Light, and many others that have the push button tail cap switch. The mount comes with two spacer rings that will allow the smaller diameter lights to be tighly clamped into the mount. Two different lengths of clamping screws are included. An Allen wrench that fits the clamping screws is also included.

SFS Picitinny Frame Rail Mount

For 1911 and Browning Hi Power. The SFS Picitinny Frame Rail Mount is an injection molded polymer Picitinny Rail that is designed to be installed on any 1911 frame or Browning Hi Power frame by simply drilling and tapping 4 small holes into the spring cover on the frame. The SFS Picitinny Fame Rail Mount is provided with the the 4 screws, an Allen wrench, and instructions on the proper location to drill and tap the monting screw holes.

The SFS Belt Holster simply provides a secure way to carry the SFS Flashlight Mount on your belt when you do not want it mounted on your pistol. The SFS Belt Holster is manufactured from an injection-molded polymer. The SFS Belt Holster has a screw adjustment to allow you to instanly size the belt slot to the size of belt that you are wearing. The screw adjustment also locks the SFS Belt Holster to your belt so that the SFS Flashlight Mount and Holster will not move on the belt.

1911 SFS Safety Fast Shooting Kit

The S.F.S. system is a drop-in kit. The 1911 S.F.S. kit can be installed in a series 70 or series 80 style 1911. When installed in a series 80, the firing pin lockout system is still fully functional.

Each
5 Pack

Warp Speed Hammer
By Cylinder & Slide

Only 10% heavier than titanium. Manufactured from a special steel alloy developed for aero space applications. 

$83.95
BUY

Super Match Commander HammerBy Cylinder & Slide

Manufactured from the same aero space steel alloy as our Warp and Light Speed Hammers and to the same specifications.

$73.50
BUY

Ultra Light Low Mass Sear
By Cylinder & Slide

Manufactured from the same aero space steel alloy as our Premium Hammers. Extremely low mass due to innovative recontouring. Designed to be used for extremely light trigger pulls. Faster reset time due to low mass which reduces the chance of following with very light trigger pulls. Sear bearing surface micro honed to produce that 2 lb. pull easily. Heat treated to 53-56 Rockwell C for extreme durability. Out lasts all other sears now on the market. Competition proven, over 40,000 rounds fired on one sear mated to our hammer with no follows at 2 lb. pull.

$47.25
BUY

Tactical Sear
By Cylinder & Slide

Manufactured from the same tough steel alloy as our tactical hammer. Manufactured to the same precision tolerances as our low mass sear. Heat treated to 44-46 Rockwell C for unlimited life expectancy. Suitable for all applications but expressly designed for the tactical pistol.

$26.25
BUY

Ultra Light Low Mass Disconnector
By Cylinder & Slide

Designed to be used for extremely light trigger pulls. Faster reset time due to low mass which reduces the chance of the trigger system not reconnecting causing a failure to fire when the trigger is being pulled extremely fast for double taps.

$28.45
BUY

TM 1911 Hammer Strut
By Cylinder & Slide

The only hammer strut on the market that is correctly designed for all applications. This hammer strut has the correct shape to prevent the hammer strut from rubbing on the sear spring causing the unloading of the sear spring tension. The TM strut is also slightly longer to allow a stronger hammer impact to the firing pin. The TM strut will provide a stronger hammer strike and faster lock time due to more main spring compression. Some fitting may be required.

$13.10
BUY

1911 45 ACP Extractor S80
By Cylinder & Slide

The Ultimate Option extractor is CNC machined from the spring steel alloy originally called for in the U.S. Government specifications for the 1911. This alloy produces an extractor with superior wear resistance and is a true spring steel. 

$28.50
BUY

Series 80 Trigger Pull Reduction Kit
By Cylinder & Slide

Contains Firing Pin Block Plunger, National Match Plunger Lever, Trigger Lever, Hammer Pin and Sear Pin. All are hand polished and Titanium Nitride coated. Reduces Series 80 Trigger Pull approximately one pound. Especially helpful in achieving the light trigger pull on Series 80 pistol. Fits Colt or Para Ordnance.

$46.00
BUY

Tactical Match 4.5 lb Trigger Pull Set
By Cylinder & Slide

This set is specifically prepped and matched to give a 4.5 lb trigger pull with out any stoning of the sear or hammer. The sear spring may need to be properly tensioned for your specific pistol. Recommended for all applications.

$116.50
BUY